Euro Motors

C 650 Sport

More torque every day.

The new BMW maxi scooter C 650 Sport turns even a routine journey into a driving experience. It is the perfect companion for anyone who is looking for a smart way to get around in the city.

The 650 cc scooter’s effortless handling and sporty performance ensure an unparalleled riding sensation. The in-line two-cylinder engine delivers an impressive 63 Nm and 44 kW (60 hp) and with a maximum speed of 180 km/h it will get you to your destination in no time at all. Taking corners and weaving through heavy city traffic is now even easier with the optimized, agile chassis and suspension.

The modern, futuristic look of the C 650 Sport is eye-catching and emphasizes the scooter’s sporty aspirations. A completely re-designed front with fairing panels that sit higher gives the maxi scooter a more sophisticated appearance. New handlebar covers with a high-gloss centre section and chrome highlights enhance the visual look of the scooter. Additionally the new stainless-steel exhaust system not only looks more attractive, it also has a more powerful sound, yet weighs less and has lower noise and exhaust emissions.

Rediscover the world you move in everyday with the C 650 Sport.

Type Water-cooled 2 cylinder 4 stroke engine, 4 valves per cylinder with bucket tappets, 2 overhead camshafts, dry sump lubrication
Bore x stroke 79 mm x 66 mm
Capacity 647 ccm
Rated output 44 kW (60 hp) at 7,750 rpm, 35 KW (48 PS) at 7,000 U/min
Max. torque 63 Nm at 6,000 rpm, 54 Nm at 4,250 U/min
Compression ratio 11.6 : 1
Mixture control / engine management BMS-E2 digital engine management
Emission control Closed-loop 3-way catalytic converter, emission standard EU-4
Performance / fuel consumption
Maximum speed 180 km/h
Consumption w.r.t WMTC for 100km 4.6 l
Fuel type Premium grade fuel, unleaded 95 (RON)
Electrical system
Alternator Three-phase generator 508 W
Battery 12 V / 14 Ah, maintenance-free
Power transmission
Clutch Centrifugal clutch
Gearbox CVT gearbox
Drive Chain drive in oil bath
Chassis / brakes
Frame Steel tube construction with aluminum die cast unit
Front wheel location / suspension Upside-down fork Ø 40 mm
Rear wheel location / suspension Single-sided swing arm
Suspension travel front / rear 115 mm / 115 mm
Wheelbase 1,591 mm
Castor 92 mm
Steering head angle 64.6°
Wheels Aluminum cast wheels
Rim, front 3.50 x 15″
Rim, rear 4.50 x 15″
Tyres, front 120/70 ZR 15
Tyres, rear 160/60 ZR 15
Brake, front Double disc brake, diameter 270 mm, 2-piston floating caliper
Brake, rear Single disc brake, diameter 270 mm, 2-piston floating caliper
ABS BMW Motorrad ABS
Dimensions / weights
Length 2,180 mm
Width (incl. mirrors) 775 (877) mm
Height (excl. mirrors) 1,378 mm
Seat height, unladen weight 800 mm
Inner leg curve, unladen weight 1,830 mm
Unladen weight, road ready, fully fuelled 1) 249 kg
Permitted total weight 445 kg
Payload (with standard equipment) 196 kg
Usable tank volume 15.5 l
Reserve 3 l

Technical data relate to the unladen weight (DIN)
1) According to Directive 93/93/EEC with all fluids, fuelled to at least 90% of usable fuel tank


Tinted sport windscreen

Gives the vehicle a sportier edge. With scratch-resistant coating for permanent transparency.
• Shorter, sportier windscreen
• Gives the vehicle a sportier appearance
• With scratch-resistant coating for permanent transparency

Sports seat

One look and you’ll want to get on. The sports seat is enhanced with decorative stitching and can even be optionally fitted with a heater (separate setting for the rider and pillion passenger).
• Materials, colour and decorative stitching give the seat an individual look
• High-quality seat cover made from textured faux leather
• Two-toned in black/grey with blue decorative double stitching
• Seat height and step length are the same as the standard seat
• Optional seat heating

Chrome parts

The chrome-plated footrest inserts and handlebar weights enhance the maxi scooter’s look and add to its individuality.
• Chrome-plated footrest inserts, rear footrests and handlebar weights
• Enhance and individualise the visual appearance of the vehicle
• Can be ordered separately or combined as desired
• Replace the previously non-chrome standard parts


Grip heating

Warm hands at the push of a button! Grip heating with three adjustable settings (setting 1, 2 and automatic heating controlled by the outside temperature). Also available as an equipment option.
• Grip heating can be retro-fitted at any time
• Replace the existing grips (new multifunction switch required on the right-hand handlebar)
• Also available as an optional accessory

Rain cover for seat

Snug, waterproof protective cover, secured under the seat with an elastic fitting. Folds away neatly, includes transport bag.
• Snug, waterproof seat cover
• Durable, UV-proof, breathable, dirt-resistant
• Fits all seats (standard, low, sport)
• Mounted with an elastic fitting underneath the seat
• Comes in a small bag for storing under the seat, for instance
• Material: nylon with waterproof PU coating
• Colour: black with grey reflective strips on the sides
• BMW Motorrad model inscription

Scooter canopy

Quick and easy to put on, this waterproof protective canopy optimally protects your favourite trousers from splashing and also provides extra warmth, if required. Can be secured against theft with the optional scooter lock.
• Snug, waterproof protective canopy offering the rider perfect protection from wind, rain and dirt on the legs and lower body
• Robust outer material made from polyester/polyurethane with inner nylon lining
• A polyester fleece, which can be removed with snap fasteners, provides protection against the cold
• Integrated, waterproof seat cover, can be stored in the rear in a zipper bag
• 3 zip pockets for small items (one above (waterproof), two on the sides (highly water resistant))
• Cover flap for the ignition steering lock and for the attachment point of the optional scooter lock
• Reflective design print on both sides for good visibility
• BMW Motorrad logo on both sides and on the top of the bag
• Quick and secure mounting on the vehicle thanks to quick release buckles and Tenax fasteners
• Lower, rear connection on both sides with 2 slotted O-rings as a safety feature. This ensures that feet can be placed on the ground quickly in an emergency (connection tears off deliberately if necessary)
• Can be protected against theft with optional scooter lock
• Recommended maximum speed with scooter canopy: 130 km/h
• Colour: black


The snug, waterproof and breathable cover protects your maxi scooter from rain, dirt and other environmental factors. Made from durable and UV-proof material.
• Snug, waterproof nylon cover with waterproof PU coating
• Protects against rain, dirt and other environmental factors
• Durable, UV-proof, breathable, dirt-resistant
• Takes up little space when stored in its bag
• Colour: black
• Grey BMW Motorrad model inscription on the top

Low seat

This seat is 20 mm lower, making climbing on and handling easier. Also available as an equipment option.
• Low seat
• Low seat (20 mm lower than standard) makes it easier to reach the ground and reduces step length
• Seat height: 780 mm (standard: 800 mm)
• Step length: 1.810 mm (standard: 1.830 mm)
• Colour: black
• Material: high-quality seat cover made from textured faux leather (like standard)
• Also available as an option

Heated seat

The seat heating has several settings and can be adjusted separately for the rider and pillion passenger, providing unlimited riding fun even during the colder months of the year. Also available as an equipment option.
• Heated seat replaces the standard seat
• The same seat height and step length with optional heated standard seat or enhanced accessory seat (sport seat)
• Additional seat heating adapter duct and new multifunction switch on the right-hand handle bar required
• Seat heating for rider and pillion passenger can be adjusted separately (via multifunction switch for rider and via side switch for pillion passenger)
• Also available as an optional accessory

Backrest for pillion passenger

The comfortable, padded, black faux leather backrest provides the pillion passenger with a comfortable ride and can be used with the luggage carrier (without topcase).
• Comfortable, padded, black faux leather backrest
• Increased comfort for the pillion passenger on long journeys
• Mounted on the rear grab handle
• Can be used with the luggage carrier (only without topcase)



The lid trim of the waterproof topcase can be matched to the colour of the maxi scooter. The optional backrest pad provides increased comfort for the pillion passenger.
• Large-capacity, waterproof plastic topcase with lid trim in the colour of the scooter
• Capacity approx. 35 litres
• Features a rear reflector on the lid
• Weight: approximately 4.5 kg
• Maximum load: 5 kg
• Recommended maximum speed with topcase: 130 km/h
• Lockable topcase, central locking with motorcycle possible
• Optional: liner for topcase, topcase backrest pad for increased pillion passenger comfort
• Can only be used with luggage carrier
• Cannot be used together with backrest pad for pillion passenger

Liner for topcase

The practical, rigid liner with waterproof main compartment ensures that contents are well protected at all times. The topcase volume is fully utilised and unloading is „as easy as 1-2-3“.
• Practical topcase liner
• Perfect fit for maximum utilisation of volume
• 1 large main compartment at the bottom, 1 small lid compartment at the top
• Main compartment waterproof thanks to sealed inner bag with sports bag fastener

Centre tunnel bag

Fits the maxi scooter perfectly, and offers a 12-litre capacity, waterproof main compartment. Detachable shoulder strap, lid compartment with dividers for small items, easily removable from the vehicle.
• Practical bag near the legs of the rider
• Perfect fit for centre tunnel
• Robust and easy to clean outer material made from polyester/polyurethane
• Floor made from moulded EVA with anti-slip coating
• Volume: approximately 12 litres
• 1 large main compartment at the bottom, 1 small lid compartment at the top with practical dividers for storing small items
• Waterproof main compartment thanks to sealed inner bag with sports bag fastener
• Long zip fastener provides easy access to main and lid compartment
• One inner net pocket with zip each in the lids of the main and lid compartments
• Stable floor and reinforced side walls for good hold and a highly rigid construction
• Length-adjustable, removable, padded shoulder strap
• Carry handle in the lid
• BMW Motorrad logo at the front and model inscription on the lid
• Quick and easy mounting on the vehicle thanks to two quick release buckles. Two brackets are bolted to the vehicle for fastening a retaining strap with two quick release buckles (Velcro). The bag is attached to the retaining strap with quick release buckles. The retaining strap can remain attached to the vehicle when riding without the centre tunnel bag.
• Delivery includes fittings and assembly instructions
• Dimensions (WxDxH): approximately 30x25x27 cm
• Maximum load: 5 kg
• Recommended maximum speed with centre tunnel bag: 130 km/h
• Colour: black

Luggage carrier

You can mount the topcase or other large items of luggage to the stable luggage carrier with its attractive design. The backrest can be attached at the same time.
• Stable and rigid luggage carrier with an attractive design
• For mounting a topcase or other items of luggage
• Luggage carrier (excluding topcase) can also be attached in combination with the pillion passenger backrest
• Delivery includes assembly instructions
• Colour: white aluminium, black lower section

Load area net

Divides the load area below the seat into two compartments, if required, e.g. for transporting small items. It can be quickly and easily installed and removed and is easy to store when not in use.
• Load area net for dividing the load area below the seat
• Divides the load area into two compartments (front and back) for transporting small items
• Can be installed and removed quickly and easily thanks to quick release buckles
• The unused load area net can be stored in the luggage compartment below the seat or in the front storage compartment (requires little space)
• Can also be used in combination with the seats (low, sport)
• Delivery includes assembly instructions
• Material: practical neoprene
• Colour: black
• BMW Motorrad logo printed in silver


BMW Motorrad Navigator V

Where am I? Where do I want to go? And what’s the most scenic way to get there? The answers to these perennial questions are always within easy reach thanks to the BMW Motorrad Navigator V – the perfect GPS navigation system. Easy to use – even with gloves on. The basic specs speak for themselves: 5″ screen, 8 GB flash storage, lifetime map updates, wireless Bluetooth® technology and optional smartphone link for traffic jam updates in real time. Includes carry pouch. In conjunction with the optional car kit, the BMW Motorrad Navigator V can also be used in a car as a hands-free device.
• GPS navigation device optimised for motorcycle use
• Large, bright, 5″ display
• Comes with or without pre-installed map data (select from Europe, North America*, Japan*, Australia/New Zealand*)
• Free map updates for the entire service life (only with pre-installed map data)
• 8 GB built-in memory (world unit 4 GB), slot for extra SD card
• Easy operation through four-button mount cradle
• Comfortable route planning with BaseCamp software that can skip waypoints (SKIP).
• „Winding roads“ route option
• Bluetooth technology for linking the communication system and mobile phone
• Power supply through the motorcycle’s OA plug
• Optional Garmin smartphone link for real-time traffic notifications, the latest weather reports and more

*Only available locally

BMW Motorrad Navigator Street

Wherever your tour takes you, with the Navigator Street you’ll experience pure riding fun. The high-contrast 4.3 inch display shows you the quickest, shortest route or also the most exciting route with the „winding roads“ routing option. The BaseCamp software lets you plan detailed custom routes. Thanks to Bluetooth technology and the optional BMW Motorrad communication system, you wirelessly receive turn-by-turn navigation directions and you can connect your smartphone and make calls with the hands-free function. You receive free updates for the pre-installed map data, for the entire service life.
• GPS navigation device optimised for motorcycle use
• High-contrast 4.3″ touch screen, can be used when wearing gloves
• Select from map data for Europe and North America*
• Free map updates for the entire service life
• 8 GB built-in memory, slot for extra SD card
• Comfortable route planning with BaseCamp software that can skip waypoints (SKIP)
• „Winding roads“ route option
• Bluetooth technology for linking the communication system and mobile phone
• Power supply through the motorcycle’s OA plug

*Only available locally

Holder for BMW Motorrad Navigator

Holder for BMW Motorrad Navigator V, BMW Motorrad Navigator Street and smartphone cradle. Guarantees an unrestricted view of the navigation system at all times.
• Vehicle-specific holder for Navigator V, Navigator Street and smartphone cradle
• Optimal position in the view of the rider

BMW Motorrad Smartphone Cradle

Easily charge your smartphone while riding your bike with the waterproof smartphone cradle by BMW Motorrad (up to 5″). The display and navigation are always in good view and can be easily operated.
• Smartphone hardcase with display panel and charger
• Robust plastic housing, dust and waterproof (IP67) with display panel made from non-reflective flexible foil
• Charge your smartphone either via micro USB or wirelessly using Qi-standard
• Power supply through the motorcycle’s OA plug
• Current charge status LED display
• Touch screen remains visible and can be operated easily, in optimal view of the rider
• Cradle moves 90 degrees and can be adjusted for landscape and portrait formats
• Non-slip, non-vibration gel pad insert
• Suitable for display sizes up to 5″, height up to 13.8 cm, width up to 7.3 cm, depth up to 1.1 cm
• Outer dimensions: approximately 18x12x5 cm
• BMW Motorrad logo on housing
• Fits all vehicle-specific holders for BMW Motorrad Navigator
• Delivery includes mounting screws and operating instructions
• Replacement parts: gel pad insert in two sizes, lid

BMW USB charger

Mobile phones with a compatible interface can be charged with the USB charger while riding.
• Electrical devices with USB interface, such as mobile phones, MP3 players and iPods, can be operated and charged
• Connection to a 12 V socket in the storage compartment of the maxi scooter
• Devices can be charged with the engine turned on or off


Anti-theft alarm system with remote control

If the motorcycle is moved or struck violently, the system responds with a clearly audible signal and a flashing warning light. Easy to operate remotely. Also available as an equipment option.
• Effective vehicle theft protection
• Alarm sounds and visual warning is activated if scooter is moved or struck violently
• Activated either automatically when switching off the ignition or via remote control, deactivated via key or remote control
• Also available as an option

LED indicators

Trend-setting design and function. With reduced energy consumption and significantly longer bulb life, the LED indicators are a shining example of efficiency. Also available as an equipment option.
• Sleek, side-mounted turn indicators with modern LED technology
• White turn indicator glass with 9 LEDs per indicator
• Greater safety in traffic with almost zero wear on the LEDs
• Reduced electricity consumption
• Also available as an option

Scooter lock

The scooter lock ensures that your maxi scooter stays exactly where you parked it. The handlebar can be secured with the swinging arm or locked to an immovable object near the scooter.
• Effective vehicle theft protection
• Chain made from ultra-tough steel with lock, approximately 60 cm in length, covered with a tough textile hose to protect against scratching
• The chain is fixed to the handlebars with the swinging arm or is placed around a fixed object such as a post and attached to the handlebar
• Easy to use, as described in the operating instructions of the maxi scooter
• Takes up little space when stored beneath the seat (e.g. while riding)
• Comes with two keys
• In some cases, it may be possible to combine the scooter lock with the chrome-plated handlebar weights (the locking unit of the scooter lock replaces the left handlebar weight)

Additional power socket

• Additional 12 V socket in the luggage compartment under the seat
• In addition to the standard socket in the storage compartment (beneath the left-hand handlebar)
• For connection of additional electronic devices


• BMW Motorrad warning triangle
• Small or large first-aid kit
• Battery charger
• Repair kit for tubeless tyres
• Motorcycle cleaner
• Engine oil

Bike ConfiguratorCONTACT